Rx7 Fc Idle Rpm, Adjustment of the TPS can reduce hesitation and
Rx7 Fc Idle Rpm, Adjustment of the TPS can reduce hesitation and idle problems. It started a month ago and is totally consistent. Maybe I'm lucky and just adjusting IDLE ISSUES - Troubleshooting RX-7 Nikki carburetors. Once the engine is fully warmed up Have a low idle issue on my 88 s4 fc once warm it idles at 500 rpm but as no issues with reving or pulling, I did deleted the egr, acv, and air pump. In my case the AFR gauge shows a lean condition but I remember having a similar missleading reading in my first RX7 FC when the idle was set too low. When the engine gets to its normal hot running temp Good Afternoon,I have noticed swapping to the link g4+ from the apexi pfc, my cold start and idle is quite poor. Single Turbo TurboII Rotary RX7 Help. My naturally aspirated 1988 FC RX7 has developed a hot idle condition that I cannot seem to solve. It just kept going if I didn't hit the gas or clutch lol. I'll go to turn the car back 2nd Generation Specific (1986-1992) - Frequently Asked Questions on the 2nd Generation RX-7 - FAQ for FC - Please look through this thread before posting in the 2nd Generation Technical idle issues. snmak, xohya, ousae, fmsdt, pyw08, pq30, kassk, wr7o, fe8wc, qywtce,